| |
 | 99 honda 3.0 VTEC ticking knocking, spun bearing? lifters
Author: maletvette
Length: 31 seconds
Rating: 4.0  |
Description: Car is having this ticking noise at idle and it increases with the rpms, having a hell of a time figureing it out, already adjusted the valves, timing belt and checked the oil screen in the fuel pump housing, next is to check for a spun bearing or worse a broken rod joint. has anybody delt with this...More Description: Car is having this ticking noise at idle and it increases with the rpms, having a hell of a time figureing it out, already adjusted the valves, timing belt and checked the oil screen in the fuel pump housing, next is to check for a spun bearing or worse a broken rod joint. has anybody delt with this on a 3.0 vtec engine? does not seem like the vtec is engaging correctly, even when we rev the car up in gear to 4500, the high rpm cam is not engaging...spun bearing? |
| |
| |
 | 92 Plymouth Laser Lifter Tick
Author: Bbdrew
Length: 4 minutes, 3 seconds
Rating: 5.0  |
Description: I was given this laser approximately a month ago. My mom owned it shortly and gave it to me. The two people who owned it before her really didn't take care of it. I'm a DSM lover and want to keep this car in working condition for a nice long time. I've done some repairs here and there, mainly to bre...More Description: I was given this laser approximately a month ago. My mom owned it shortly and gave it to me. The two people who owned it before her really didn't take care of it. I'm a DSM lover and want to keep this car in working condition for a nice long time. I've done some repairs here and there, mainly to breaks, calipers. The transmission and clutch are also brand new. I'm working on the music system's wiring since the kid who had it before my mom literally cut the back window defroster right off and ... |
| |
| |
 | Old Holdens Never Die
Author: BigMaxTube
Length: 3 minutes, 36 seconds
Rating: 5.0 |
Description: for some reason), clean the plugs and points and then pour some Nitro Methane / Methanol into the carby as can be seen in this video, it even picked up the old petrol in the tank, and then Voila! It lives! It is currently fitted with a 173ci straight six which runs amazingly well (even the noisy lif...More Description: for some reason), clean the plugs and points and then pour some Nitro Methane / Methanol into the carby as can be seen in this video, it even picked up the old petrol in the tank, and then Voila! It lives! It is currently fitted with a 173ci straight six which runs amazingly well (even the noisy lifters are quiet now after running for a while), but I suspect it will become the new home for my frankenstein 253ci V8 shown elsewhere on YouTube ... GM Holden HQ Ute Derelict Project First Engine ... |
| |
| |
 | How to fix ? Stuck lifter? Rocker arm? what's wrong
Author: dbanks4271
Length: 36 seconds
Rating:  |
Description: 350 chevy with 268 comp cam motor rebuilt heads to.just on the passenger side the noise is coming from
Description: 350 chevy with 268 comp cam motor rebuilt heads to.just on the passenger side the noise is coming from |
| |
| |
 | Engine Noise...What is it?
Author: irelynx
Length: 2 minutes, 58 seconds
Rating: 3.0  |
Description: Lifter tick? Doesn't seem like rod knock since everything seems to say that's fairly loud/expensive sounding. Possibly the timing chain? How about an exhaust manifold leak (bad gasket)? It makes the noise all the time, doesn't quiet down when the engine warms up, so that pretty much rules out piston...More Description: Lifter tick? Doesn't seem like rod knock since everything seems to say that's fairly loud/expensive sounding. Possibly the timing chain? How about an exhaust manifold leak (bad gasket)? It makes the noise all the time, doesn't quiet down when the engine warms up, so that pretty much rules out piston slap. I first noticed it ~1000mi ago when I had the new exhaust put on (old one was either too loud to hear it, or the noise didn't start until new exhaust went on), and it has only gotten louder ... |
| |
| |
 | Dodge Stealth.. lifter tick??
Author: jodale24
Length: 13 seconds
Rating: |
Description: 3.5Lengine...what is that ticking noise? lifter tick? valve slap? need help, car will not b running till we know the problem and/or how to fix it. really need help, thanks
Description: 3.5Lengine...what is that ticking noise? lifter tick? valve slap? need help, car will not b running till we know the problem and/or how to fix it. really need help, thanks |
| |
| |
 | 2000 Grand Prix 3.1L lifter tap...I think...i hope
Author: happyryanhappy
Length: 47 seconds
Rating: |
Description: Looking for any solutions to this problem. Hope that it is something simplistic so as i can fix it myself and then resell. Any thoughts are appreciated...
Description: Looking for any solutions to this problem. Hope that it is something simplistic so as i can fix it myself and then resell. Any thoughts are appreciated... |
| |
| |
 | Olds Intrigue Engine Noise, Please Help!!!
Author: linko47
Length: 26 seconds
Rating: 5.0 |
Description: This is a 2001 Oldmobile Intrigue, 3.5L v6. I'm not sure what this noise is, and I need help identifying the problem. If you have any idea at all, please help!!
Description: This is a 2001 Oldmobile Intrigue, 3.5L v6. I'm not sure what this noise is, and I need help identifying the problem. If you have any idea at all, please help!! |
| |
| |
 | Mazda MX5 HLA noise during Forte Motor Flush
Author: n0nPro
Length: 24 seconds
Rating: |
Description: HLA noise during Forte Motor Flush. 2krpm for approximately half an hour before changing the oil from 5w40 to 10w60 with Forte Top End Treatment HLAs are quiet now, but we'll just have to see if this helped at all. Update: 28.9.09 and ~700 kilometers after it still gets HLA tick at cold start which ...More Description: HLA noise during Forte Motor Flush. 2krpm for approximately half an hour before changing the oil from 5w40 to 10w60 with Forte Top End Treatment HLAs are quiet now, but we'll just have to see if this helped at all. Update: 28.9.09 and ~700 kilometers after it still gets HLA tick at cold start which is normal and sometimes when engine is warming up. With fully warmed engine I have heard HLA ticking sound just once. So I think it helped a bit, maybe it gets better in time and more kilometers ... |
| |
| |
 | New motor startup after replacing stock intake cam gears with BDE upgraded ones
Author: BlackRC3
Length: 42 seconds
Rating: 3.0 |
Description: set in the mail, changed them in and WHAT A DIFFERENCE!! the sound is completely gone! you can actually hear the injectors tick the motor is so quiet now :):) so there you have it folks, crazy loud ticking comming from a new engine with valve train mods? Change your intake cam gears! Man am i glad t...More Description: set in the mail, changed them in and WHAT A DIFFERENCE!! the sound is completely gone! you can actually hear the injectors tick the motor is so quiet now :):) so there you have it folks, crazy loud ticking comming from a new engine with valve train mods? Change your intake cam gears! Man am i glad to have my mechanic working on this car, he called it from the beginning (cam gears) when i and just about everyone else thought it was lifters. Thanks Ron! ... 300zx noise lifter "cam gear" ... |
| |
